Troubleshooting Fusion Swap Issues
Most stuck Fusion swaps are caused by provider-side processing, KYC requirements or blockchain confirmation delays, not by Zelcore. Find your provider and Order ID in your swap history (Swap > View Transaction History > Track Exchange), check confirmations and the expected time, then contact the provider directly with your Order ID.
Written for Zelcore 8.39.0 (October 2026).
Background: Zelcore Fusion Swap: Aggregator, Slippage, and On-Ramps
For how to make a swap, what it costs, the min/max limits and the error messages shown before you confirm, see Swap Crypto in Zelcore: Fees and Limits. This page covers swaps that are already under way.
Quick fix
- In Zelcore, open Swap in the left menu, select View Transaction History and find your order. Select Track Exchange to see its status. Note the provider and the Order ID.
- Check that your sending transaction has its blockchain confirmations.
- Compare the elapsed time with the typical processing times in Step 3 before you escalate. A "Hold" status can take 12-48 hours for provider review.
- Contact the provider directly with your Order ID and transaction hash, and complete KYC if the provider asks for it.
- Save the order details, transaction hashes, screenshots and provider messages for support.
Overview
Fusion swaps in Zelcore are powered by third-party exchange providers (for example ChangeNOW, Changelly, Exolix, SimpleSwap or ChangeHero). The providers shown depend on the pair and your country.
Prerequisites
- Access to your Zelcore wallet
- Your Fusion swap order ID or transaction hash
- The email or contact information used for the swap (if any)
- Your source and destination wallet addresses
Common Symptoms
You may be experiencing a Fusion swap issue if you notice:
- Swap order status showing "Hold" for extended periods
- Status stuck on "Awaiting blockchain confirmation" for hours or days
- Funds deducted from source chain but nothing received on destination chain
- Order showing "Finished" but no receiving transaction
- Swap requiring unexpected KYC (Know Your Customer) verification
- No status updates after initial transaction confirmation
- Provider showing different status than Zelcore displays
Understanding Fusion Swap Statuses
Normal Swap Flow
A successful swap typically goes through these stages:
- Waiting for deposit - Provider waiting for your blockchain transaction
- Confirming - Your transaction is being confirmed on the source blockchain
- Exchanging - Provider is processing the swap
- Sending - Funds being sent to your destination address
- Finished - Swap completed successfully
Problem Statuses
- Hold: Provider has flagged the transaction for review (security, compliance, or technical reasons)
- Awaiting blockchain confirmation: Stuck waiting for confirmations (may indicate blockchain congestion or provider node issues)
- Finished (no receive tx): Provider marked as complete but funds not received
- Failed: Swap cancelled or rejected by provider
Step-by-Step Troubleshooting
Step 1: Identify Your Swap Provider
First, determine which third-party provider is handling your swap:
- Open Zelcore
- Open Swap in the left menu and select View Transaction History
- Find your order and select Track Exchange
- Note the provider name (for example ChangeNOW, Changelly, Exolix, XOSwap, Rango, Binance Web3 or InstaSwap)
- Record your Order ID (you'll need this for support)
Why this matters: Each provider has different processing times, policies, and support channels. You'll need to contact them directly for most issues.
Step 2: Verify Blockchain Confirmations
Confirm your source transaction is actually on the blockchain:
- Copy your source transaction hash from Zelcore
- Visit the appropriate blockchain explorer:
- FLUX: explorer.runonflux.io
- Ethereum (ETH): etherscan.io
- BNB Smart Chain (BSC): bscscan.com
- Solana (SOL): solscan.io
- Tron (TRX): tronscan.org
- Base: basescan.org
- Avalanche (AVAX): snowtrace.io
- Algorand (ALGO): algoexplorer.io
- Paste your transaction hash in the search bar
- Check confirmations:
- Most swaps require 5-20 confirmations depending on the blockchain
- If confirmations are insufficient, wait for more blocks
- If transaction failed or is pending, that's your issue
Common blockchain issues:
- Network congestion causing slow confirmations
- Insufficient gas/transaction fees (transaction stuck)
- Transaction rejected by network
- Wrong contract address or token type sent
Step 3: Check Swap Time Expectations
Different swap routes have different processing times:
Typical Processing Times:
- Fast blockchains (SOL, TRX, BSC): 5-30 minutes after confirmations
- Ethereum swaps: 15-60 minutes (depends on gas fees and confirmations)
- FLUX swaps: 20-45 minutes
- Cross-chain swaps: 30 minutes to 2 hours
- During high volume: Can extend to 2-6 hours
"Hold" status often requires: 12-48 hours for provider review
If your swap is within these timeframes, wait a bit longer before escalating.
Step 4: Contact the Provider Directly
Most stuck swaps must be resolved by the exchange provider, not Zelcore. Here's how to contact each provider:
ChangeHero Support
Best method: Email support with your order ID
- Email: support@changehero.io
- Subject line: "Order [YOUR_ORDER_ID] - Status Issue"
- Include:
- Order ID
- Source transaction hash
- Issue description ("Hold status", "Not received", etc.)
- Your destination address
Response time: Usually 12-24 hours Website: changehero.io/status (check order status)
ChangeNow Support
Best method: Live chat or email
- Live chat: Go to changenow.io and use chat widget
- Email: support@changenow.io
- Status check: changenow.io/exchange/txs/[ORDER_ID]
- Include all order details and transaction hashes
Response time: Live chat: 1-4 hours, Email: 12-24 hours
SimpleSwap Support
Best method: Email or Telegram
- Email: support@simpleswap.io
- Telegram: @SimpleSwapSupportBot
- Status check: simpleswap.io/track
- Provide order ID and describe the issue
Response time: Email: 12-48 hours, Telegram: 2-8 hours
Changelly Support
Best method: Support ticket system
- Go to changelly.com/support
- Submit a support ticket
- Select category: "Exchange Issue"
- Include order ID and transaction details
Response time: 24-48 hours
Step 5: Handle KYC Requirements
Some swaps may be flagged for KYC (Know Your Customer) verification, especially:
- Large transaction amounts (typically $1,000+)
- First-time swaps with a provider
- Transactions from or to certain regions
- Security flags on blockchain addresses
If KYC is required:
- Provider will email you (check spam folder)
- Follow their KYC process:
- Usually requires: government ID, selfie, proof of address
- Submit documents through provider's portal
- Wait for verification (typically 24-72 hours)
- After approval: Swap will be processed normally
- If denied: Provider will initiate refund to source address
Important: Zelcore does not control KYC requirements. These are mandated by the exchange providers based on their compliance policies.
Step 6: Check for Provider Maintenance or Issues
Sometimes providers experience technical issues or maintenance:
-
Check provider status pages:
- ChangeHero: changehero.io (announcements section)
- ChangeNow: Check their Twitter @ChangeNOW_io
- SimpleSwap: Check their Telegram community
- Changelly: changelly.com (status updates)
-
Check Zelcore official channels:
- Discord: Official Zelcore server
- X: @zelcore_io
- Telegram: Zelcore community
If provider maintenance is ongoing: Wait for service restoration, then contact provider support if issue persists.
Step 7: Document Everything
Keep records of your swap for support purposes:
Essential information to save:
- Order ID from your Zelcore swap history
- Source transaction hash (sending blockchain)
- Source wallet address (where you sent from)
- Destination wallet address (where you should receive)
- Screenshots of order status in Zelcore
- Screenshots of blockchain confirmations
- Any emails or communications from provider
- Dates and times of each status change
This documentation will speed up support resolution significantly.
Common Issues and Specific Solutions
Issue: Order Stuck on "Hold" for Days
Cause: Provider's automated security system flagged the transaction for manual review.
Solution:
- Contact the provider immediately (don't wait longer)
- Provide all transaction details
- Be prepared to answer security questions or provide KYC
- Ask for estimated resolution time
- Follow up every 24 hours if no response
Timeline: Usually resolved within 48-72 hours after provider contact.
Issue: "Awaiting Blockchain Confirmation" for Hours
Cause: Either blockchain congestion, insufficient confirmations, or provider node sync issues.
Solution:
- Check your transaction on blockchain explorer
- Verify it has sufficient confirmations (20+ is safe)
- If confirmations are sufficient but status unchanged:
- Wait 2-4 additional hours
- Contact provider support with transaction hash
- Provider may need to manually sync their nodes
- If transaction has no confirmations after 2+ hours:
- Check if transaction failed
- Verify you used correct amount and address
- May need to resend transaction
Issue: Swap Shows "Finished" but No Funds Received
Cause: Provider marked as complete but payout transaction failed or wasn't broadcast.
Solution:
- Check destination address on blockchain explorer
- Verify the address matches what you provided
- If no incoming transaction visible:
- Contact provider immediately
- Request the outgoing transaction hash
- Provider must rebroadcast or investigate
- If transaction exists but failed:
- Provider typically will retry or refund
- Contact them with explorer link showing failed tx
Issue: Wrong Amount Received
Cause: Exchange rate changes, hidden fees, or provider error.
Solution:
- Review the exchange rate locked at order creation
- Check the provider fee: fees vary, and the app shows the rate and network fee before you confirm
- Network fees on destination chain also deducted
- If amount is significantly wrong (>5% from expected):
- Contact provider with calculation showing discrepancy
- Request explanation or adjustment
- Small variations (1-3%) are typically due to rate slippage and are normal
Issue: Funds Deducted but Order Not Created
Cause: Transaction sent to wrong address or order creation failed.
Solution:
- Verify you sent to provider's deposit address (from your Zelcore swap order)
- Check if you have an order ID in Zelcore
- If order exists in Zelcore:
- Contact provider with order ID
- Transaction should be linked to order
- If no order exists but transaction sent:
- This is critical - contact provider IMMEDIATELY
- Provide transaction hash and intended order details
- Provider may be able to manually create order
Issue: Multiple Swaps Stuck with Same Provider
Cause: Provider experiencing widespread technical issues or your account flagged.
Solution:
- Check if provider has announced maintenance or issues
- Contact support mentioning all affected order IDs
- May indicate account-level issue requiring KYC or verification
- Consider using alternative provider for future swaps
- Don't create new orders until existing ones are resolved
Issue: "Contact Fusion Support" Error Message
Cause: Provider has encountered a technical issue, critical processing error, or requires manual intervention beyond standard "Hold" status.
Solution:
This error indicates the provider cannot automatically process your swap and needs direct communication.
Immediate steps:
- Do NOT create a new swap - This won't resolve the issue and creates more confusion
- Screenshot the error - Capture the exact message and order ID
- Note all transaction details:
- Order ID from Zelcore
- Source transaction hash (blockchain confirmation)
- Provider name (for example ChangeNOW, Changelly, Exolix, XOSwap, Rango, Binance Web3 or InstaSwap)
- Amount sent and expected to receive
- Time when swap was initiated
Contact the provider immediately:
The error message specifically indicates provider-side intervention is required. Zelcore cannot resolve this - you must contact the exchange provider directly.
For ChangeHero orders:
- Email: support@changehero.io
- Subject: "URGENT: Order [ORDER_ID] - Contact Fusion Support Error"
- Include: All transaction details, screenshots, description of error
- Expected response: 12-24 hours
For ChangeNow orders:
- Use live chat: changenow.io (fastest)
- Or email: support@changenow.io
- Reference order ID immediately in chat
- Include screenshots and error message
- Expected response: Chat 1-4 hours, Email 12-24 hours
For SimpleSwap orders:
- Telegram: @SimpleSwapSupportBot (fastest)
- Email: support@simpleswap.io
- Mention "Contact Fusion Support" error explicitly
- Provide full order details
- Expected response: Telegram 2-8 hours, Email 12-48 hours
For Changelly orders:
- Submit ticket: changelly.com/support
- Category: "Exchange Issue - Critical"
- Detailed description with error message
- Attach screenshots
- Expected response: 24-48 hours
What the provider needs to do:
This error typically requires provider staff to:
- Manually review your transaction on blockchain
- Link your payment to the order in their system
- Investigate why automated processing failed
- Manually process the swap OR issue refund
- Provide explanation of what went wrong
Common causes of this error:
-
Order creation failed but payment sent:
- Your blockchain transaction succeeded
- Provider's order system failed to create order properly
- Payment received but not linked to order
- Requires manual order creation by provider
-
Technical glitch during processing:
- Provider's automated systems encountered error
- Swap stuck in intermediate state
- Needs manual intervention to complete or refund
-
Blockchain confirmation issue:
- Payment received but blockchain data incomplete
- Provider cannot verify transaction details automatically
- Manual verification needed
-
Provider system maintenance side effect:
- Swap created during provider update or maintenance
- System changes caused processing interruption
- Staff needs to manually complete
Timeline expectations:
- Initial provider response: 12-48 hours
- Issue investigation: 1-3 business days
- Resolution (swap completion or refund): 3-7 business days
- Complex cases: Up to 10 business days
If provider doesn't respond:
After 48 hours with no response:
- Follow up with the same provider through alternative channel
- Reference your original support ticket or email
- Escalate through provider's social media if available
- After 5+ days, contact Zelcore support for guidance
Important notes:
- Your funds are not lost - Provider has received them and must either complete swap or refund
- Zelcore cannot access provider systems - Only the provider can resolve this
- This is a provider issue, not Zelcore bug - Error message correctly directs you to contact them
- Document everything - Save all communications, screenshots, and transaction hashes
- Be patient but persistent - Provider must resolve, but may take several days
Prevention:
While this error is rare and largely unavoidable:
- Avoid creating swaps during known provider maintenance windows
- Check provider status pages before large swaps
- Keep individual swap amounts moderate (reduces complexity)
- Save order confirmation details immediately after creation
- Consider test swap if route or provider is new to you
Timeline: Usually resolved within 3-5 business days after provider contact, though complex cases may take up to 10 days.
Issue: Insufficient Gas/Fees on Target Chain
Cause: You don't have enough of the target chain's native token to pay transaction fees when receiving funds.
Important: This is one of the most common reasons for swap failures or delayed completions, especially for users new to cross-chain swaps.
Understanding gas requirements:
What is gas?
Each blockchain requires you to pay transaction fees in its native token:
- Ethereum: Requires ETH for gas
- BNB Smart Chain: Requires BNB for gas
- Polygon: Requires MATIC for gas
- Avalanche: Requires AVAX for gas
- Arbitrum: Requires ETH for gas
- Optimism: Requires ETH for gas
- Base: Requires ETH for gas
- Fantom: Requires FTM for gas
- Solana: Requires SOL for gas
- Tron: Requires TRX for gas/energy
Why you need gas on the destination chain:
Even though the swap provider sends you tokens, you need gas in your destination wallet to:
- Accept/process incoming transactions (some chains)
- Later move or swap those tokens
- Interact with DeFi protocols
- Send tokens to exchanges or other wallets
Common gas-related swap issues:
1. Swap completes but you can't move received tokens:
Most common scenario:
- Swap successfully sends tokens to your wallet
- Tokens appear in your balance
- But you have 0 ETH/BNB/MATIC/etc. for gas
- Cannot send tokens anywhere
- Tokens are "stuck" until you add gas
Example:
- You swap USDT (on Ethereum) to USDC (on Polygon)
- Receive USDC successfully to Polygon address
- But have 0 MATIC in wallet
- Cannot send USDC anywhere without MATIC for gas
- Need to acquire MATIC to unstuck the USDC
2. Smart contract token swaps fail without gas:
For ERC-20 and similar tokens:
- Receiving the token may require gas (contract interaction)
- Swap provider sends transaction
- Your wallet needs gas to process it
- If insufficient gas, transaction may fail
- Provider sees failure, may retry or refund
3. Gas price volatility during swap:
- Gas fees fluctuate based on network congestion
- Swap created during low gas
- Payout happens during high gas
- Provider's gas estimation may be insufficient
- Can delay or fail transaction
How to prevent gas issues:
Before creating a swap:
1. Research target chain gas requirements:
Typical amounts needed (as of current rates):
- Ethereum: $5-20 worth of ETH (can be very high during congestion)
- BNB Smart Chain: $0.50-2 worth of BNB
- Polygon: $0.10-0.50 worth of MATIC
- Avalanche: $0.50-2 worth of AVAX
- Arbitrum/Optimism/Base: $0.50-3 worth of ETH (L2s are cheaper than mainnet)
- Fantom: $0.10-1 worth of FTM
- Solana: $0.01-0.10 worth of SOL
- Tron: $0.10-1 worth of TRX
2. Acquire gas BEFORE swapping:
Best practice workflow:
- Check your destination wallet: Do you already have gas tokens?
- If not, acquire gas first:
- Option A: Buy small amount of native token on exchange, send to wallet
- Option B: Use Swap to swap a small amount to native token first
- Option C: Use faucets (for testnets) or on-ramps
- Verify gas is in wallet before executing main swap
- Then proceed with your main swap
Example workflow:
- Want to swap 1000 USDT (Ethereum) to USDC (Polygon)
- First, swap $5 of USDT to MATIC (send to your Polygon address)
- Wait for MATIC to arrive and confirm
- Then swap remaining USDT to USDC (Polygon)
- Now you have MATIC gas to move the USDC later
3. Keep gas buffer in each chain you use:
Long-term strategy:
- Maintain small balance of native token on each chain
- $5-10 worth is usually sufficient for multiple transactions
- Replenish when it gets low
- Treat it as operational cost of multi-chain usage
What to do if you're already stuck (have tokens but no gas):
Solution 1: Send gas from another wallet/exchange:
If you have native token elsewhere:
- Buy or transfer native token on exchange (ETH, BNB, MATIC, etc.)
- Withdraw to your wallet address on that chain
- Wait for confirmation
- Now you have gas to move your stuck tokens
Solution 2: Use a gas faucet (for some chains):
Some chains offer small free amounts:
- Search for "[chain name] faucet" (e.g., "Polygon faucet")
- Usually very small amounts (enough for 1-2 transactions)
- May require social media verification
- Not available for all chains
Solution 3: Use cross-chain gas services:
Some services send gas cross-chain:
- LayerZero Gas Service
- Other cross-chain bridges with gas airdrop features
- Usually charge fee but convenient
Solution 4: Ask in community for small gas donation:
Last resort:
- Post in blockchain community (Discord, Telegram, Reddit)
- Explain you're stuck without gas
- Provide your wallet address
- Someone may send small amount
- Offer to pay back once unstuck
Swap-specific considerations:
Swapping TO expensive gas chains (Ethereum mainnet):
Extra caution needed:
- Ethereum gas is most expensive
- Make sure destination address already has ETH
- Or swap small amount to ETH first
- Consider using L2s (Arbitrum, Optimism, Base) instead when possible
Swapping large amounts:
For high-value swaps:
- Ensure more gas than usual (higher priority fees)
- Network congestion can spike fees
- Better to have too much gas buffer than too little
Swapping during network congestion:
If chain is congested:
- Gas prices are higher
- Transactions take longer
- Provider may need higher gas to complete payout
- Consider waiting for lower congestion
- Or ensure extra gas buffer
Testing with small amounts:
Best practice for new chains:
- Test swap first: Small amount to new chain
- Verify gas requirements: See actual fees
- Ensure you have enough gas for future transactions
- Then do larger swap with confidence
Provider-specific gas handling:
Exchange-style providers (for example ChangeNOW and Changelly):
- Provider pays gas for outgoing transaction (to send you tokens)
- Gas is included in their fee/spread
- You don't pay gas for receiving
- BUT you still need gas in wallet to later move tokens
What providers DON'T cover:
- Gas for you to later move the tokens
- Gas for smart contract interactions
- Future transaction fees
Prevention checklist before any swap:
- Researched destination chain gas requirements
- Checked current gas prices on destination chain
- Verified I have sufficient gas token in destination wallet
- Or planned to acquire gas first via separate swap
- Confirmed destination wallet address is correct
- Understand gas token for that chain (ETH, BNB, MATIC, etc.)
Special case: First time using a chain:
If this is your first time receiving tokens on a specific chain:
-
Do gas swap first (small amount):
- Swap $5-10 worth to native token
- Send to destination address
- Wait for confirmation
- Verify you can see it in wallet
-
Then do main swap:
- Now you have gas for operations
- Less stressful than being stuck
Gas estimation resources:
Check current gas prices:
- Ethereum: https://etherscan.io/gastracker
- BNB Smart Chain: https://bscscan.com/gastracker
- Polygon: https://polygonscan.com/gastracker
- Avalanche: https://snowtrace.io/gastracker
- Arbitrum: https://arbiscan.io/gastracker
Gas calculators:
- Most blockchain explorers have gas trackers
- Show current "fast/standard/slow" prices
- Estimate cost for common operations
Common misconceptions:
Myth 1: "The swap includes gas for me to use tokens later"
- Reality: No. Provider pays gas to send TO you, but you need gas for YOUR future transactions.
Myth 2: "I don't need gas just to receive tokens"
- Partial truth: Receiving is usually free, but you'll immediately need gas to do anything with them.
Myth 3: "I can swap later to get gas"
- Problem: If you have 0 gas, you can't initiate a swap FROM those tokens (need gas to send them).
Myth 4: "Small amounts don't need gas"
- Reality: Every transaction needs gas, regardless of amount.
Related scenarios:
Scenario A: "My swap finished but tokens not showing"
- Check if destination chain requires gas to activate account (some chains)
- Verify transaction on blockchain explorer
- May need minimum balance to create account (SOL, TRX have minimums)
Scenario B: "Swap pending on sending but I'm receiving to new chain"
- Make sure destination wallet has gas ready
- Reduces friction when swap completes
- Won't be stuck immediately after receiving
Best long-term practice:
Maintain gas reserves across chains you use:
Set up "gas fund" for each blockchain:
- Ethereum: $20-50 ETH
- BNB Smart Chain: $5-10 BNB
- Polygon: $2-5 MATIC
- Avalanche: $5-10 AVAX
- Arbitrum/Optimism/Base: $5-10 ETH
- Others: $2-10 depending on usage
Replenish when low:
- Set reminders to check monthly
- Add gas before it hits zero
- Prevents being stuck
Track gas spending:
- Note how much gas typical operations cost
- Helps estimate buffer needed
- Adjust reserves based on actual usage
Key takeaway:
Always have gas on the destination chain BEFORE swapping TO that chain. This is not optional - it's essential for managing your crypto effectively.
Related:
- Understanding Blockchain Confirmations
- Multi-Chain Wallet Management
Prevention Tips
To minimize Fusion swap issues in the future:
- Ensure gas on destination chain: Always have native token (ETH, BNB, MATIC, etc.) on the target chain BEFORE swapping - see "Insufficient Gas/Fees on Target Chain" section above
- Use stable networks: Avoid swapping during known network congestion
- Double-check addresses: Verify destination address before confirming
- Start with small amounts: Test swaps with smaller amounts first
- Allow sufficient gas: Use recommended gas fees for source transactions
- Save order details immediately: Screenshot or record order ID right away
- Check provider status: Look for maintenance announcements before swapping
- Be aware of limits: Large swaps more likely to trigger KYC
- Use established providers: Stick to the providers Zelcore shows you in Swap
- Monitor blockchain confirmations: Check explorer for confirmation status
- Keep Zelcore updated: Latest version may have improved provider integrations
When to Contact Zelcore Support
Contact Zelcore support (not provider support) if:
- You cannot determine which provider handled your swap
- Zelcore app is not showing your order at all
- You suspect a Zelcore app bug (not provider issue)
- Provider support is unresponsive for 5+ days
- You need help interpreting provider responses
- Multiple users reporting same issue (possible systemic problem)
Important: For stuck swaps, orders on "Hold", or missing funds, you MUST contact the provider first. Zelcore cannot access provider systems or expedite their processing.
Zelcore Support Resources:
- Discord: Official Zelcore Discord server (best for community help)
- Help desk: Open a ticket at support.zelcore.io
- X: @zelcore_io (for status updates and announcements)
Understanding Fusion Architecture
How Fusion works:
Zelcore Fusion is an aggregator that connects you to third-party exchange providers. When you create a swap:
- Zelcore shows you rates from multiple providers
- You select the best rate
- Zelcore creates an order with that provider on your behalf
- You send crypto to the provider's deposit address
- Provider processes the exchange
- Provider sends swapped crypto to your destination address
- Zelcore displays the status updates from provider
Key point: Zelcore does not hold, process, or control your funds during a swap. The third-party provider is responsible for the actual exchange, including KYC, fraud prevention, and payout processing.
This means:
- Provider policies apply (not Zelcore policies)
- Provider support must resolve most issues
- KYC requirements come from providers
- Processing times depend on provider operations
- Zelcore cannot override provider holds or decisions
Refunds and Failed Swaps
When can you get a refund?
- Swap cancelled before processing
- KYC verification failed or declined
- Technical issue prevents swap completion
- Provider determines swap cannot be completed
Refund process:
- Provider initiates refund to source address
- Refund typically processed within 24-72 hours
- May be subject to blockchain network fees
- You receive crypto in original currency (not swapped)
- Provider will notify you by email
If refund doesn't arrive:
- Check source address on blockchain explorer
- Verify provider said refund was sent
- Request refund transaction hash from provider
- Contact provider if refund transaction missing or failed
Related Documentation
- Swap Crypto in Zelcore: Fees and Limits
- Using Zelcore Fusion for Crypto Swaps
- Understanding Blockchain Confirmations
- Zelcore Security Best Practices
- Fusion FAQ
Technical Background
Why do swaps get stuck?
Fusion swaps involve multiple steps across different blockchains:
- Source blockchain confirmation (5-20 blocks typically)
- Provider receives and verifies (automated system checks)
- Compliance screening (automated fraud/AML checks)
- Exchange execution (provider performs the swap)
- Destination blockchain payout (provider broadcasts transaction)
Any of these steps can experience delays:
- Blockchain congestion affects confirmations
- Large amounts trigger manual review
- Provider liquidity issues delay execution
- Destination chain fees or node issues delay payout
- Compliance flags require human intervention
Is my crypto safe during issues?
Generally yes, but the risk profile differs from using Zelcore's wallet directly:
- Once sent to provider, they control the funds (not you)
- Reputable providers (for example ChangeNOW or Changelly) are established services
- Funds are eventually processed, refunded, or require KYC
- Very few swaps result in permanent loss with established providers
- Always verify you're using legitimate provider addresses from Zelcore
Best practice: Only swap amounts you're comfortable having in a third party's control for 24-48 hours during processing.